Safety in Work Zones: Simple Ways To Save Your Life

Stay updated with our newsletter

Dont worry we wont share your details with anyone.

While working in an environment where accidents are high probability, it is mandatory to lay down rules and regulations that the employees need to adhere to. To work in a factory, warehouse, or any kind of setup where physical labour is a must, preventing any kind of hazard should be the priority. However, accidents cannot be stopped from occurring but preventive measures can be taken. Here is where Reflectosafe comes into the picture.

Reasons that compromise Work Zone Safety

We are always in a haste and there are instances where to save time we leave the site or do the work haphazardly and forget to carry out proper precautions. This is one of the major reasons accidents occur. Safety continues to be compromised with the violations of rules at the workplace. Leaving substances unattended is one of the reasons why workplace safety gets compromised. Manual handling of chemicals or any substance injurious to health can lead to unwanted incidents and can cause lifelong impairment.

There are times when there are spillovers and workers who are unaware of the spillover often tend to trip over it and injure themselves. That is why we hope for you to consider reflective jackets and tapes as they protect you by being wildly visible for you to notice them. For example, operating high-end machinery which is heavy & can pose serious damage to life is a major reason for accidents at the workplace. Not carrying out the instructions while working with such machines can be dangerous & result in death if the damage is severe.

Improper Implementation of Laws

In many places, a lot of rules are violated and never acknowledged by the seniors. This results in constant law-breaking situations & many times it is the labourer who pays for the cost of damage by suffering the consequences either physically or monetarily.

A lot of biases in the workplace are the second reason accidents take place. Better opportunities & finding ways to complete the work in less time leads to unethical means and using machines continuously & exceeding the limit can cause consequences and poses you with more risk.

One of the major reasons is corruption. To gain maximum profit minimum investment is done in the infrastructure & exterior factors such have an avid effect on the infrastructure and the fear of any calamity taking place always looms over the head.

Improper Implementation of Laws

We always talk about the importance of high visibility for people on the roads. While that is necessary, it is also essential for traffic officers (police) to be visible so that people can slow down their vehicles. The reflective tapes on the traffic police vests will assist people in spotting them and will stay out of their path.

Lack Of Warning Signs

In a workplace where the work pivots around physical labour & using machines, it is mandatory to have warning signs with 3m wide reflective tapes wherever possible. Lack of signs or signs which are not clear, broken, or barely visible is the major cause of accidents. The signs are overlooked and often lead the labourers in grave danger. One must consider using tapes from Reflectosafe as they might reduce the chances of critical incidents.

It is necessary to use signs with reflective tapes, which can be seen in poor light as well and a good number of signs should be put up. Warning signs should be put up using reflective tapes which are durable . They should be well maintained for the labourers to look at them & be aware of the place and the harm it can cause. Poor maintenance of the area is also concerning as the poor condition of the place may become a severe issue later in the future.

Lack Of Proper Reflective Wear

While associating with machines & performing tasks one should always carry out all the safety measures. Not adhering to the safety guidelines & avoiding wearing reflective wear is a major cause of accidents. In workplaces where the area is dimly light or high-temperature control areas, it is mandatory for the workers to always have their safety gears on

There are many instances where a worker tries to save some time & does not comply with all the safety guidelines & ends up hurting themselves or losing their life. Lack of proper reflective wear for a worker working on roads & such places can lead to grave situations. Reflective wear helps the worker be noticed

The risk of being hit or getting collided by any vehicle due to a lack of reflective signs becomes maximum. Reflective signs optimize the risk of being hit & pose less danger to the workers

Hi-vi Clothing Is A Must

Hi-Vi or High Visibility Clothing is a must for the worker who performs their jobs on a road where there is a frequent passing of speeding vehicles, in this case, Reflectosafe HI-VI jackets are a lie-safer. There are key characteristics one should remember while purchasing High Visibility apparel. The durability of the reflective tape on the clothing items should be good and should not peel off with age or chip off. It should also be noted that the clothes are resistant to dirt, weather & such exterior factors.

Would you like a customized jacket for your organization?
Just fill in your requirements in the form below and we will get back to you shortly

Fill the following details to download the brochure

Download our brochure instantly by simply filling out the form below. Explore our offerings and discover how we can meet your needs effectively.

Quality Control Order

Government of India has issued Quality Control Order (QCO) on protective workwear like reflective safety jackets and Fore Retardant Garment to stipulate conformity of these products to Indian Standards.

Kindly click below Download Button for detailed notification.

Request Distributorship

We value your partnership and look forward to discussing potential collaboration opportunities. Please fill out the form to proceed.